
Switch Mode Power Supplies
Single Output
AC/DC Power Supply
ALS50-12
Description:
The ALS50-12 is a single output power supply. It provides a DC output power in a cost-effective
open frame package. Excellent performance specifications are provided, together with compliance
to European EMC (EN55022, Class A), and Low Voltage directive (TUV EN60950).
Specifications (@25C)
Input Characteristics:
Input Voltage (5) :
Input Frequency Range (1) :
Max Input Current:
Max Inrush Current:
Hold-Up Time:
Output Characteristics:
Output Voltage:
Output Current (1) :
Output Power (1) :
Ripple & Noise (20 MHz BW):
Line Regulation (4) :
Load Regulation (3) :
Temperature Drift:
Rise-up Time:
Over Current Protection:
Over Voltage Protection:
Short Circuit Protection:
Adj. O/P Voltage Range (1,2) :
110/220Vac (90-260Vac, 120-370Vdc)
47-63Hz
1.0A @ 110Vac; 0.5A @ 220Vac
30A @ 220VAc
17ms typ @ 110Vac, 100% Load
12.0Vdc
4.2A
50.4W
120mV
1.0%
2.0%
0.02%/°C
500ms max, 110Vac, 100% Load
Shutdown, O.C.P Point>120%, recycle AC supply to recover
>105% Zener across output
Unit shutdown, recycle AC supply to recover
±10%
Environmental Specifications:
EMI (Conducted RFI) :
EFT:
ESD:
Surge:
Operating Temperature:
Operating Humidity:
Storage Temperature:
Storage Humidity:
Cooling:
Vibration:
Shock:
General Specifications:
Efficiency:
Dimensions (WxLxH):
Weight:
Warranty:
Safety Standards:
Standard:
Dielectric Strength:
Insulation Resistance:
Web: www.TriadMagnetics.com
Built to comply with EN55022-B
Built to comply with IEC61000-4-4
Built to comply with IEC61000-4-2
Built to comply with IEC61000-4-5
Convection cooling 0 to 50°C:100%; 60°C:70%
30% to 90% RH
-25 to 85°C
10% to 95% RH
Convection cooling
1min sweep 10-55Hz, 2G Amplitude, X,Y,Z axis 1hr each
<20G
70% Typical
76.20x127x35.56mm
300g
2 years @ 40°C, 100% Load
UL1950 (E204980)
TUV EN60950 (50070245)
Built to meet CSA 22.2
I/P-O/P:3kVac, I/P-FG:2.5kVac, <10mA, 1min
O/P-FG: 500VDC>100Mohms
Phone 951-277-0757
Fax 951-277-2757
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: December 4, 2013